| Model | ECOO-V |
| Plate Type | Low chemistry violet plate, negative printing |
| Application | Newspaper Printing |
| Substrate | Electro chemically Grained and Anodized Aluminum |
| Gauge | 0.20, 0.25, 0.30, 0.40(mm) |
| Maximum short grain width | Maximum width 1320 mm |
| Developer | Developing gum |
| Length of Run | Unbaked: 200,000 impressions; Baked: 500,000 impressions(dependent upon image resolution, press, press chemical, ink and paper conditions) |
| Plate setters Capability | All the main brands violet CTP in market, laser power no less than 30 mw |
| Aluminum | Standard 1050 Alloy |
| Exposure energy | 50-60 μj/ cm²(based on plate setter and developing condition) |
| Developing time | 20±3 sec |
| Developing Temperature | 28±2ºC |
| Spectral Sensitivity | 405 nm |
| Resolution | 150lpi (2-98%), under1800dpi, 25μm line can be produced. |
| Preheat | 95-121ºC |
| Brush Speed | 100 rpm |
| Shelf life | 12 months under recommended storage conditions |
| Storage and handling | Store plates flat in their packaging, away from excessive cold, heat or high humidity. Recommended condition is: temperature 15-28ºC and RH between 30-70%; Handle with care, the maximum height is 1.2m' Open the box under yellow light. Sealed the box with remained plate to avoid moisture. |
Features:
1. Eco-Friendly: applied with low PH finisher during washout treatment, reducing chemical consumption and liquid waste
2. Stable Developing Performance: compatible with most brands of violet plate developer and less sensitive to PH value of finisher
3. Lower Investment and Maintenance Cost: can work with simplied processor, which removes prewash, post-rinse and gumming steps from conventional processor
4. Higher Run Length: outside protective layer protects sensitive layer from damage, making more impressions per plate.
Q1: Can I get the sample?
A: We are very glad to provide some sample for you to test. We usually provide 5-15pieces plates for free,but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.
Q2: What is the cost for the CTP plate sample freight?
A: The Air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the Pick-up service from your local agent.
Q3: How long can the sample be ready?
A: It usually takes about 3days to prepare the sample.
Q4: Can I visit your factory?
A: You are warmly welcomed to visit our factory! Our company is in Hangzhou city,which is about 1.5 hour by train from Shanghai.
Q5: How many Square Meters CTP plates can feed one 20' container?
A: About 20000-25000SQM
Q6: Can I take my own brand and label on the packing?
A: Yes, we can provide the OEM with the customer's brand and label.
