Processless (process-free) plate
high run lengths, imaging speeds, excellent dot reproduction
Processless plate is a new kind of environment-friendly and cost-efficient product which benefits printers to safe the processing stage.
After exposure, it can be put on press directly. It can be used by up to 80% of offset printers.
With handling capabilities that match most unbaked processed plates.
Processless plate combines eco-friendly operation, excellent quality and is easy to use.
Best in class chemical-free Direct-on-Press printing plate for classic sheetfed printing applications.
It can be run directly on a printing press after imaging, without a need for chemical processing.
-Environmentally friendly operation at low cost.
-Excellent picture quality -Wide range of applications
-Fast in circulation production -Excellent handling in daylight.
-Long stability of latent image, can be stored at least a week after plate-making
Recommended application to press procedures:
1. Clean all the inks on the blanket;
2. Start the press machine, apply the water roller, run 30-40 seconds;
3. Apply the ink rollers 20-30 seconds; 4. Apply the paper and start print.
Remark: If operate step 2 and 3 longer, paper will be wasted less.
||Non-ablation thermal-negative type
||High grade commercial and newspaper printing
||Electrolyte graining and Anodized AL substrate
||0.15mm / 0.30mm
||Various dominant thermal platesetters in the market
||130-150 mj/ m²
|The period of latent image stabilization
|Recommended screen method
||1-99% @200 LPI AM or 20μm FM or mixture
|The paper number of start-up
||4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended.
||Without processing, directly on press
||100,000 impressions, actual run length depends on printing conditions
|Maximum short grain width
||Maximum width 1280 mm
|Photosensitive wave length
||12 months under recommended condition
||Packed in seal and stored by means of prevention from light, moisture, overheat and high humidity
||Recommended condition: 18ºC-24ºC, 40%-50% RH.
Producing and Packing
Q1: Can I get a sample?
A: We are very glad to provide some sample for you to test. We usually provide 5-15pieces plates for free,but sincerely hope to get your kind support for the air courier freight. This cost can ber returned to you in your first order.
Q2: What is the cost for the CTP plate sample freight?
A: The Air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the Pick-up service from your local agent.
Q3: How long can the sample be ready?
A: It usually takes about 3days to prepare the sample.
Q4: Can I visit your factory?
A: You are warmly welcomed to visit our factory! Our company is in Hangzhou city,which is about 1.5 hour by train from Shanghai.
Q5: How many Square Meters CTP plates can feed one 20' container?
A: About 20000-25000SQM
Q6: Can I take my own brand and label on the packing?
A: Yes, we can provide the OEM with the customer's brand and label.