|Plate Type||Low chemistry violet plate, negative printing|
|Substrate||Electro chemically Grained and Anodized Aluminum|
|Gauge||0.20, 0.25, 0.30, 0.40(mm)|
|Maximum short grain width||Maximum width 1320 mm|
|Length of Run||Unbaked: 200,000 impressions;
Baked: 500,000 impressions(dependent upon image resolution, press,
press chemical, ink and paper conditions)
|Plate setters Capability||All the main brands violet CTP in market, laser power no less than 30 mw|
|Aluminum||Standard 1050 Alloy|
|Exposure energy||50-60 μj/ cm²(based on plate setter and developing condition)|
|Developing time||20±3 sec|
|Spectral Sensitivity||405 nm|
|Resolution||150lpi (2-98%), under1800dpi, 25μm line can be produced.|
|Brush Speed||100 rpm|
|Shelf life||12 months under recommended storage conditions|
|Storage and handling||Store plates flat in their packaging, away from excessive cold, heat or high humidity.
Recommended condition is: temperature 15-28ºC and RH between 30-70%;
Handle with care, the maximum height is 1.2m'
Open the box under yellow light. Sealed the box with remained plate to avoid moisture.
1. How long is the lead time ?
The lead time is normally 25 days.
2. Do you offer free plate samples ?
Yes, we offer free testing samples maximum 12 pcs for each size but with delivery fee collect.
3. How do you guarantee stable quality ?
There are 3 inpecting procedures: 1. automatic on-line 24 h scanning detector; 2. random sampling per 15 mins at the producing line; 3. manually full inspection before packing.
4. Do you have accompanying plate making products to enable one-stand easy purchase for some end users ?
Yes. CTP machine, processors, developers, ink, blanket and some common fihishing machines are also within our category.
5. Payment term
Normally, 30% deposit, 70% before shipping.