ECOO-V is a negative working low chemistry plate. It can be applied with low-PH finisher during the washing-out treatment, which streamlines the post-treatment process and reduces chemical consumption. No effluent is emitted during the process and less waste is generated, which meets the requirements of modern environmental printing and improves enterprise's competitiveness.
1. Stable developing performance, compatible with various kinds of developers
2. Reduce equipment investment and maintenance cost
3. green printing, environment protetion
| Model | ECOO-V |
| Plate Type | Negative working, violet photopolymer digital plate |
| Application | Newspaper/Commercial printing |
| Aluminum | Electrochemically grained and anodized aluminum substrate |
| Gauge | 0.15mm/0.20/0.25/0.30mm |
| Maximum width | 1320mm |
| Spectral sensitivity | 405nm |
| Platesetter compatibility | All the main brands in market,like Agfa/FFEI&FUJI/Krause/ECRM/Highwater/Escher-Grad/Dotline |
| Sensitivity | 50-60 uJ/cm2 |
| Resolution | 2% to 98% @ 150 lpi under calibration |
| Processors | Recommended: Glunz&Jensen Raptor,Height inca/maya etc. |
| Developer | Huaguang PPD, FUJI LP-DWS, Agfa PL-10, IMAF NEGA 910 |
| Processing | Preheat temp setting 90-100°C (plate surface temp.) |
| For HuaGuang PPD: Developer, temperature 22-24°C /Dwell time 16-17 seconds | |
| For FUJI LP-DWS: Developer temperature 25-26°C /Dwell time 16-17 seconds | |
| For Agfa PL-10:Developer temperature 24°C /Dwell time 17 seconds | |
| Run length | More than 150,000 impressions. |
| Actual run length may vary according to press/paper/ink conditions | |
| Safelight | For manual handling and platesetting loading, darkroom conditions with G10 safelight is required |
| Shelf life | 12 months, under recommended storage conditions |
| Transport and storage | Store plates flat in their packaging (un-opened), away from excessive cold, heat or high humidity at 15°C -26°C, with RH between 40 - 70%. |
Protection Gum and plate developer. 20 liter per drum. For customer option.
