Easy To Use Positive PS Plate Offset Printing Plate For Conventional Printing
' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ Application ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ '
EcooGraphix PS Plate or conventional analog plate can be used for offset/lithographic commercial and newspaper printing. Unique production technology and high quality raw materials make the plate gain high photosensitive speed, good half-tone dot reproduction and stable performance.
' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ Specification ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ '
Model
ECOO-PS
Plate Type
Positive PS Plate
Application
Commercial and newspaper printing
Substrate
Electro chemically grained and Anodized lithographic aluminum
Gauge
0.15, 0.20, 0.25, 0.30, 0.40(mm)
Maximum short grain width
Maximum width 1280 mm
Power of light
3,000 - 5,000 w
Length of Run
Unbaked: 50,000 to 100,000 impressions
Baked: Over 100,000 impressions
Processor
All brands or Manual
Aluminum
Standard 1050 Alloy
Developing time
20-30 sec
Spectral Sensitivity
320 - 405 nm
Resolution
1-99% @ 300LPI
Image Color
Green
Developer
Any positive plate developer or our own developer
Processing temperature
20-25ºC
Processing Speed
0.80 - 1.20 m/min
Safelight
Handle under yellow safe light(UV free)
Shelf life
12 months under recommended storage conditions
Packaging
Available in all standard formats, including bulk packaging options such as APL packaging
Storage and handing
Stored in a cool and dry environment, away from excessive cold, heat and humidity
Model | ECOO-PS |
Plate Type | Positive PS Plate |
Application | Commercial and newspaper printing |
Substrate | Electro chemically grained and Anodized lithographic aluminum |
Gauge | 0.15, 0.20, 0.25, 0.30, 0.40(mm) |
Maximum short grain width | Maximum width 1280 mm |
Power of light | 3,000 - 5,000 w |
Length of Run | Unbaked: 50,000 to 100,000 impressions Baked: Over 100,000 impressions |
Processor | All brands or Manual |
Aluminum | Standard 1050 Alloy |
Developing time | 20-30 sec |
Spectral Sensitivity | 320 - 405 nm |
Resolution | 1-99% @ 300LPI |
Image Color | Green |
Developer | Any positive plate developer or our own developer |
Processing temperature | 20-25ºC |
Processing Speed | 0.80 - 1.20 m/min |
safelight | Handle under yellow safe light(UV free) |
Shelf life | 12 months under recommended storage conditions |
Packaging |
Available in all standard formats, including bulk packaging options such as APL packaging |
Storage and handing |
Stored in a cool and dry environment, away from excessive cold, heat and humidity |
' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ Certificates ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ '
' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ FAQ ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ ' ~ '
Q1: Can I get the sample ?
A: We are very glad to provide some sample for you to test. We usually provide 5-15 pieces plates for free, but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.
|
Q2: What is the cost for the CTP plate sample freight ?
|
Q3: How long can the sample be ready ?
|
Q4: Can I visit your factory ?
|
Q5: How many Square Meters CTP plates can feed one 20' container ?
|
Q6: Can I take my own brand and label on the packing ?
|