50 to 70 MJ/SQM Double Layers Positive Writing HighG-rade CTCP Plate
Introduction
EcooGraphix Positive CTCP Plate(Double Layer) are made for UV-based ink. It is also compatible with ordinary ink.
It is used for long-run length high-grade offset commercial printing and newspaper printing.
Specification
Model
ECOO-CTCP-D
Plate Type
No preheat, positive working, UV sensitive plate, double-coated, no need baking for UV ink printing
Application
Newspaper printing, commercial printing, and package printing
Substrate
Electrochemically Grained and Anodized Aluminum
Gauge
0.15, 0.20, 0.25, 0.30, 0.40(mm)
Maximum short grain width
Maximum width 1350 mm
Developer
Any positive plate developer or our developer
Length of Run
200,000 impressions unbaked;
70,000 impressions with UV ink unbaked;
1,000,000 impressions baked.
Plate setters Capability
All the main brands of violet CTP in the market, have laser power of no less than 30 mw
Aluminum
Standard 1050 Alloy
Exposure energy
50-65uj/cm²(based on plate setter and developing condition)
Developing time
20 ±3 sec
Developing Temperature
28 ±2ºC
Spectral Sensitivity
405 nm
Resolution
1-99% @ 200 LPI & 20 uFM
Shelf life
12 months under recommended storage conditions
Storage and handling
Stored in a cool and dry environment, away from excessive cold, and heat.
Product highlight
High sensitivity; Extend laser life for image setter; Grain efficiency; Positive CTCP plate
| Model | ECOO-CTCP-D |
| Plate Type | No preheat, positive working, UV sensitive plate, double-coated, no need baking for UV ink printing short grain width |
| Application | Newspaper printing, commercial printing, and package printing |
| Substrate | Electrochemically Grained and Anodized Aluminum |
| Gauge | 0.15, 0.20, 0.25, 0.30, 0.40(mm) |
| Maximum | Maximum width 1350 mm |
| Developer | Any positive plate developer or our own developer |
| Length of Run | 200,000 impressions unbaked; 70,000 impressions with UV ink unbaked; 1,000,000 impressions baked. |
| Plate setters Capability | All the main brands violet CTP in market, laser power no less than 30 mw |
| Aluminum | Standard 1050 Alloy |
| Exposure energy | 50-65uj/cm²(based on plate setter and developing condition) |
| Developing time | 20 ±3 sec |
| Developing Temperature | 28 ±2ºC |
| Spectral Sensitivity | 405 nm |
| Resolution | 1-99% @ 200 LPI & 20 uFM |
| Shelf life | 12 months under recommended storage conditions |
| Storage and handing | Stored in a cool and dry environment, away from excessive cold, heat. |
| Product highlight | High sensitivity; Extend laser life for image setter; Grain efficiency; Positive CTCP plate |
Characteristics
Features
- Positive writing CTCP(conventional) plate
- Double layers system
- Made with high-grade aluminum from Europe
- Wide adaptability for different plate setter brands
- Non-ablative coating
- Run lengths up to 80,000 impressions
- UV Ink up to 50,000 impressions
- Ability to print both AM and FM screening
Advantages
- Resist UV-ink; workable with both normal ink and UV ink
- Mature product, good stability, and wide processing latitude
- Long run length with non-ablative coating
- Being adaptive to most platesetters, processors, and solutions.
Benefits
- Rapid turnaround time on press
- Robust coating and consistent reliability
- Compatible with most developers
- Premium quality of dot reproduction and long run length
Producing And Packaging
From production to delivery, we make every detail very carefully to guarantee good product quality and service to customers.
Certifications
FAQ
Q1: Can I get the sample?
A: We are very glad to provide some samples for you to test.
We usually provide 5-15 pieces of plates for free, but sincerely hope to get your kind support for the air courier freight.
This cost can be returned to you in your first order.
Q2: What is the cost for the CTP plate sample freight?
A: The air freight depends on the packing size, weight, and the delivery destination.
Or you can arrange the pick-up service from your local agent.
Q3: How long can the sample be ready?
A: It usually takes about 3 days to prepare the sample.
Q4: Can I visit your factory?
A: You are warmly welcome to visit our factory! Our company is in Hangzhou City,
which is about 1.5 hours by train from Shanghai.
Q5: How many square meters of CTP plates can feed one 20' container?
A: About 20000-25000sqm.
Q6: Can I take my brand and label on the packing?
A: Yes, we can provide the OEM with the customer's brand and label.
Video ☞ https://youtu.be/5AXNTTn6Om8
