Without Processing Offset Printing Plate Chemistry Free CTP Plate
EcooGraphix Ecoo-G is a new, environmentally friendly, Development On Press CTP plate. It can be run directly on a printing press after imaging, without a need for chemical processing.
High grade commercial and newspaper printing
Electrolyte graining and Anodized AL substrate
0.15mm / 0.30mm
Maximum short grain width
Maximum width 1280 mm
Photosensitive wave length
Various dominant thermal platesetters in the market
130-150 mj/ cm²
The period of latent image stabilization
Recommended screen method
1-99% @200 LPI AM or 20μm FM or mixture
The paper number of start-up
4 hours under yellow light; 1 hour under fluorescent lamp; Direct exposure under natural light is safe but not recommended.
Without processing, directly on press
100,000 impressions, Actual run length depends on printing conditions
12 months under recommended condition
Packed in seal and stored by means of prevention from light, moisture, overheat and high humidity
Recommended condition: 18ºC-24ºC, 40%-50% RH.
|Plate Type||Thermal-negative type|
|Application||High grade commercial and newspaper printing|
|Substrate||Electrolyte graining and Anodized AL substrate|
|Thickness||0.15mm / 0.30mm|
|Maximum short grain width||Maximum width 1280 mm|
|Spectrum scope||800-850 nm|
|Photosensitive wave length||830 nm|
|Platesetter||Various dominant thermal platesetters in the market|
|Low-energy imaging||130-150 mj/ cm²|
|The period of latent image stabilization||≤7 days|
|Recommended screen method||1-99% @200 LPI AM or 20μm FM or mixture|
|The paper number of start-up||<50 sheets|
|Safety light||4 hours under yellow light; 1 hour under fluorescent lamp;
Direct exposure under natural light is safe but not recommended.
|Processing||Without processing, directly on press|
|Run Length||100,000 impressions
Actual run length depends on printing conditions
|Shelf life||12 months under recommended condition|
|Transportation||Packed in seal and stored by means of prevention
from light, moisture, overheat and high humidity
|Storage||Recommended condition: 18ºC-24ºC, 40%-50% RH.|
Applied parameters in Imaging device
|LOTTEM 400(TH1.7)||MAGNUS 400||Screen 8600S|
|Laser power||15-17W||300-320mw||19.5-21.5W||80-90 %|
|Parameter that need set up||Focus/ Zoom||Focus/ Zoom||Focus/ Zoom||Focus/ Zoom|
*Note: Higher exposure energy will make the image contrast more clear, and benefit to the plate run length; while over high/low exposure energy will affect the image quality negatively.
ECOO-G Processless CTP plate Video: https://youtu.be/LLqNaY1ivcI
ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution; while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution.
4. Customer's Feedback
5. Producing And Packaging
From producing to delivery, we make every details very carefully to guarantee the good product quality and service to customers.