Brief introduction
This ECOO-V Low Chem Violet Plate is an environmental friendly product. Compared with normal violet CTP plate, the plate keeps original photosensitive features and printing compatibility
Technical data
| Plate Type | Negative working, violet photopolymer digital plate |
| Application | Newspaper/Commercial printing |
| Aluminum | Electrochemically grained and anodized aluminum substrate |
| Gauge | 0.15mm/0.20/0.25/0.30mm |
| Maximum width | 1320mm |
| Spectral sensitivity | 405nm |
| Platesetter compatibility | All the main brands in market,like Agfa/FFEI&FUJI/Krause/ECRM/Highwater/Escher-Grad/Dotline |
| Sensitivity | 70-80 uJ/cm2 |
| Resolution | 3% to 97% @ 175 lpi under calibration |
| Processors | Recommended: Glunz&Jensen Raptor,Height inca/maya etc. |
| Developer | Huaguang PPD, FUJI LP-DWS, Agfa PL-10, IMAF NEGA 910 |
| Processing | Preheat temp setting 90-100°C (plate surface temp.) |
| For HuaGuang PPD: Developer, temperature 22-24°C /Dwell time 16-17 seconds | |
| For FUJI LP-DWS: Developer temperature 25-26°C /Dwell time 16-17 seconds | |
| For Agfa PL-10:Developer temperature 24°C /Dwell time 17 seconds | |
| Run length | More than 150,000 impressions. |
| Actual run length may vary according to press/paper/ink conditions | |
| Safelight | For manual handling and platesetting loading, darkroom conditions with G10 safelight is required |
| Shelf life | 12 months, under recommended storage conditions |
| Transport and storage | Store plates flat in their packaging (un-opened), away from excessive cold, heat or high humidity at 15°C -26°C, with RH between 40 - 70%. |
Plate structure
How to work
Advantages
Simplifying the processing, only three steps including preheating, developing and drying.
Reducing chemical consumption, saving water.
Weak alkali developer maximumly avoid developing inconsistency due to exhausted developer. It makes print quality more stable.
Certificate
Our factory
FAQ
1. How long is the lead time?
The lead time is normally 30 days.
2. Do you offer free plate samples?
Yes, we offer free testing samples maximum 12 pcs for each size but with delivery fee collect.
3. How do you guarantee stable quality?
There are 3 inpecting procedures: 1, automatic on-line 24h scanning detector; 2, random sampling per 15 mins at the producing line; 3, manually full inspection before packing.
4. Do you have accompanying plate making products to enable one-stand easy purchase for some end users?
Yes. CTP machine, processors, developers, ink, blanket and some common fihishing machines are also within our category.
5. Payment term
Normally, 30% deposit, 70% before shipping.
