High Sensitive Negative Processless CTCP UV Plate
Feateures:
DOP plate
non-chemical
environment friendly.
processless
chemistry free
Brief introduction
ECOO-H Processless negative CTCP Plate is the latest product. The plate can be exposed on UV image-setter and applied on printing machine directly without processing or developing. With ECOO-H, you can be more competitive in reducing cost, and achieve higher gain efficiency and green printing. It is very unique. So far most orders comes from USA and Canada. Wish more printing houses like this plate and try our free sample.
Technical data
| Model | ECOO-H |
| Plate Type | |
| Application | High grade commercial and newspaper printing |
| Substrate | Electrolyte graining and Anodized AL substrate |
| Thickness | 0.15mm / 0.30mm |
| Maximum short grain width | Maximum width 1280 mm |
| Photosensitive wave length | 405 nm |
| Platesetter | Various dominant UV platesetters in the market |
| Image color | Gray |
| Low-energy imaging | 20 mj/ cm² |
| The period of latent image stabilization | ≤7 days |
| Recommended screen method | 1-99 @200 Lpi AM / 20u FM and mixture |
| The paper number of start-up | <50 sheets |
| Safety light | 1 hour under fluorescent lamp, no direct irradiation with natural light, 4 hours under yellow light |
| Processing | Without processing, directly on press |
| Run Length | 100,000 impressions Actual run length depends on printing conditions |
| Shelf life | 12 months under recommended |
| Transportation | Packed in seal and stored by means of preventing from light / moisture, over heat and high humidity |
| Storage | Recommended condition: 18ºC~24ºC, 40%-50% RH. |
Advantages
Negative non-ablation photosensitive system
Compatible with the dominant devices in the market
Can be printed directly on the machine without any processing steps after scanning by thermal CTP platesetter
Good dot reproduction, stable performance, wide processing latitude
Long stability of latent image, can be stored at least a week after plate-making
High quality aluminum substrate, professional coating formulation
Factory
FAQ
1. How long is the lead time?
The lead time is normally 30-45 days. We can accelerate for emergency cases.
2. How long is shelf life?
Normally 12 months. We do not recommend over storage for this plate.
3. What is your moq for this plate? how to achieve your sample?
Our MOQ for end user is 1000 sqm and for dealer is 3000 sqm. Let us know your prefered sample size and quantity. then we will prepare free sample for you. The sample is free of charge. But the buyer has to arrange courier shipment on their own.
4. Do you have accompanying plate products to make an easy and overall purchase for some end users?
Yes, we have both single layer/double layer CTP/CTCP plate, PS plate, violet plate and processless CTP plate, developer, gum, plate cleaner, roll washer, fountian solution and premier quality of printing blanket.
5. What is your normal Payment term?
Normally, 30% deposit, 70% before shipping, or LC at sight.
