1. Application
EcooGraphix Ecoo-G is a new, environmental friendly,Development On Press CTP plate . It can be run directly on a printing press after imaging,without a need for chemical processing.
2. Characteristic
ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution; while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution.
3. Specification
| Plate Technical Specification |
| |
|
| Model |
ECOO-G |
| Plate Type |
Non-ablation thermal-negative type |
| Application |
High grade commercial and newspaper printing |
| Substrate |
Electrolyte graining and Anodized AL substrate |
| Thickness |
0.15mm / 0.30mm |
| Spectrum scope |
800-850nm |
| Platesetter |
Various dominant thermal platesetters in the market |
| Low-energy imaging |
130~150mJ/cm² |
| The period of latent image stabilization |
≤7days |
|
Recommended
screen method
|
1~99 @200Lpi AM/20u FM and mixture |
| The paper number of start-up |
<50 sheets |
| Safety Light |
1 hour under fluorescent lamp, no direct irradiation with natural light, 4 hours under yellow light |
| Processing |
Without processing,directly on press |
| Run Length |
100,000 impressions,actual run length depends on printing conditions |
| Baking |
No recommended |
| Characteristics |
|
| Negative non-ablation photosensitive system |
| Compatible with the dominant devices in the market |
| Can be printed directly on the machine without any processing steps after scanning by thermal CTP platesetter |
| Good dot reproduction,stable performance,wide processing latitude |
| Long stability of latent image,can be stored at least a week after plate-making |
| High quality aluminum substrate,professional coating formulation |
| Application |
|
| Suitable for sheet-fed offset press or high speed rotary offset press |
| Run length:100,000 impressions |
| Suitable for different types of traditional inks and fountain solutions,including alcohol’s substitutes as fountain solutions |
| Unsuitable to improve run length by baking plates |
| Transportation and Storage |
|
| Packed in seal and stored by means of preventing from light/moisture,over heat and high humidity. |
| Recommended conditions:18℃~24℃,40%~50% RH. |
4. Technical features
|
Plate
Features
|
ECOO-G |
Kodak
Sonora XP
|
| Sensitive wavelength(nm) |
800-850 |
800-850 |
| Coating color |
Grey |
Light green |
| Sensitivity(mj/cm2) |
150 |
150 |
| Exposure in safe light |
White light 1 hour; yellow light 24 hours |
White light 1 hour; yellow light 24 hours |
| After image contrast |
Can be spotted by eyes, but auto punching machine cannot recognize it |
Can be spotted by eyes, auto punching machine can recognize it |
| Imaging device |
Normal thermal CTP device |
Normal thermal CTP device |
| Resolution |
1-99% @ 200lpi (dependent on CTP capability) |
1-99% @ 200lpi (dependent on CTP capability) |
| Run-length |
100,000 |
100,000 |
| Storage |
12 month (under recommend environment) |
12 month (under recommend environment) |
ECOO-G has a wide range of exposure energy, the range is 140-200mj/cm2 (similar range to Sonora XP plate), and the dot gain percentage is not much different within this range.
* Note: Higher exposure energy will make the image contrast more clear, and benefit to the plate run length; while over high/low exposure energy will affect the image quality negatively.
Recommended application to press procedures of ECOO-G:
Clean all the inks on the blanket;
Start the press machine, apply the water roller, run 30-40 seconds;
Apply the ink rollers 20-30 seconds;
Apply the paper and start print.
Remark: If operate step 2 and 3 longer, paper will be wasted less.
5. Plate Producing and Packing
From producing to delivery,we make every details very carefully to guarantee the good product quality and service to customers .
6. Our Partner and Customers feedback
7. FAQ
Q1: Can I get the sample?
A: We are very glad to provide some sample for you to test. We usually provide 5-15pieces plates for free,but sincerely hope to get your kind support for the air courier freight. This cost can be returned to you in your first order.
Q2: What is the cost for the CTP plate sample freight?
A: The Air freight depends on the packing size and weight, and the delivery destination. Or you can arrange the Pick-up service from your local agent.
Q3: How long can the sample be ready?
A: It usually takes about 3days to prepare the sample.
Q4: Can I visit your factory?
A: You are warmly welcomed to visit our factory! Our company is in Hangzhou city,which is about 1.5 hour by train from Shanghai.
Your message must be between 20-3,000 characters!
