Processless thermal negative CTP plate for offset Printing
ECOO-G is our processless plate, also known as chemistry-free plate, process-free plate, DOP plate. It could be applied on printing machine directly without processing or developing, just like Kodak Sonora and Agfa Azura. You could save cost of processing machine and chemistry and water treatment and labor cost and shorten the plate making time to optimize your printing procedure.
Since it is envirnoment-friendly and arise no pollution, it is in trend and gains more and more popularity. It is smart ot choose this plate.
Technical data
| Model | Ecoo-G |
| Plate type | Non-ablation thermal-Negative type |
| Application | High grage commercial and newsprinting |
| Substrate | Electrolyte graining and Anodozed AL substrate |
| Thickness | 0.15mm-0.4mm |
| Spetrum scope | 800-850 nm |
| Plate setter | Various dominant thermal platesetters in the market |
| Low-energy imaging | 130-150 mj/m² |
| The period of latent image stablization | ≤7 days |
| Recommended screen method | 1-99@ 200 lpi AM/20U FM and mixture |
| The paper number of start-up | < 50 sheets |
| Safety light | 1 hour under fluorescent lamp, no direct irradiation with natural light, 4 hours under yellow light. |
| Processing | Without processing, directly on press |
| Run length | 100000 impressions, actual run length depend on printing conditions |
| Baking | No recomended |
Features
Negatibe non-ablation photosensitive system;
Compatible with dominant devices in the market.
Can be printed directively on the machine withour processing steps after scanning by thermal CTP platesetter.
Good dot reproduction, stable performance.
long stablity of latent image, can be stores at least a week after plate-making.
High quality aluminum substrate, professional coating formulation.
How to use this plate after imaging?
Plate structure
ECOO-G is double layer, and the emulsion layer will not dissolve into water, so it will not integrate into fountain solution; while the protection layer is well water-soluble, and it will be easy dissolved into the fountain solution. Kodak Sonora XP is single layer plate, and its emulsion layer is water-soluble, and can be dissolved into fountain solution.
Our factory and certificate
Headquartered in HangZhou China, EcooGraphix is a leading international CTP and plate provider who place great emphasis on R&D, manufacturing, market development and technical support. With one of the largest CTP manufacturing facilities and plate production lines,EcooGraphix supplies Thousands of printers worldwide with superior quality CTP equipment and CTP plates.
Transpotation and storage
Packed in seal and stored by means of preventing from light/moisture, over heat and high humidity.
Could be shipped in general container, very economic.
Recommended conditions: 18ºC-24ºC, 40%-50% RH.
Some tips for your reference
1. this is thermal negative plate, so you should have thermal CTP, not UV CTP.
2. If you use this plate, no need to buy developer and processing machine.
3. we do not have convention processlesss negative CTCP plate so far.
4. ECOO-G plate will be affected by high temperature and high humidity. Recommended shipment and storage condition is 18-25 OC, RH 30-50%.
5. In the comparison test between ECOO-G and Sonora XP, each of them has longer run-length at same customer. It is hard to determine which one has longer run-length generally in actual production.
