CTP Plate Processor for Kodak Agfa Amsky Thermal CTP CTCP Platesetter
for Online or Offline Offset Printing Thermal CTP/CTCP Platesetter
1) User friendly operation: touch sreen is adopted for user operation; it makes the machine more humanized.
2) Easy maintenance: main parts are mostly located sides of machine, and they are easy to acess; scales
and position mark are built into the machine;it is easy to get removed parts back after maintenance.
3) Safety standard: chemical low-level waming, drier overheat self. protectin, plate jam warning and
cover safety protection can give warming or even stop machine for the safety purpose.
4) Robustness, rliability and consistency: PVC board tub and tough rubber rller is used in the machine.
It is high resistant to acid alkali crrsion; key-slot designis adopted at pocessr chain and gears tasmissin,
which makes it stronger resistance to impact.
5) Optimized plate processing path: double chemical recyding pipes make the chemical better distributed;
well designed plate path workflow curve, ensures the plate pocssing stable and smooth through developing,
washing, gluing and drying tank.
6) Unique roller design: ensues even suezing efect along rollers.
7) Environmental fiendliness and energy saving: optimized inner water wash dirculation design, can save water
as high as 70% comparing with full running water wash. Heating arlow is protected by pipes, saving the energy flfienty.
|Page size||The most wide: 1500 mm shortest: 300 mm|
|Processing power||Speed adjustable (10 to 60 seconds) 400-1000 mm/minutes|
|Temperature||10 to 45 ℃ can be adjusted (automatic temperature control, cooling system)|
|Drying temperature||20-65 ℃ can be adjusted|
|Power supply||220 V (208 V-240 V) single-phase 50-60hz/6.5KW|
|Rotary Speed of Wash Brush||85-130rpm|
|Water supply||Tap water|
|Gumming||Auto gumming system|
|Dev.heating-up rate||About 0.5 ℃/minute|
Other smaller models
|ECOOGRAPHIX CTP Processor Series Specifications|
|Page Size||280-895 mm||280-1150 mm||290-1250 mm|
|Processor Power||10-60 seconds||10-60 seconds||10-60 seconds|
|Temperature||10 to 45 ºC can be adjusted (automatic temperature control, cooling system)|
|Drying Temperature||20-65 ºC can be adjusted|
|Electricity Source||220 V (210V-240 V)single-phase50-60hz|
1) The excellent overall design ensures the development effect, clear outlets, stable product performance and strong reliability.
2) The development temperature and development time are precisely controlled to meet the washing requirements of various plates and potions, and the application range is wide.
3) The water-saving effect is remarkable. The precise control of the washing time and the scientific design of the spraying method can save 80% of water.
4) Significant energy saving in drying, uniform layout temperature (30% energy saving for peers)
5) Intelligent replenishment system of developer solution to ensure the development effect and reduce waste.
6) The scientific design of the power, filtration and piping layout of the development cycle can effectively inhibit crystallization.
7) Low liquid level alarm, drying and over-temperature self-protection function, safe and reliable.
8) Touch screen man-machine interface, intuitive and easy to understand, makes the operation more convenient.
9) The accessories such as rubber roller and brush are easy to fold in half, and have the function of position memory, easy maintenance.
1. What are your main products ?
Our main products are the Prepress 4up and 8up Online/Offline Thermal CTP , CTCP , VLF CTP and CTCP, Flexo CTP , Processor , Offset Plates ,inks , blankets , postpress Packing equipments and so on.
Our partners in USA,Canada,Mexico,Colombia,Turkey,Hungary,South Africa and so on are very pleased with our Technician Support service and product performance.
You can get the prepress equipment and consumables all in one and no worry about the after-sales service from our company.
2. Where is your factory ?
Our CTP machine factory is located in Hangzhou city , which is about 1.5 hour by train from Shanghai.
You are warmly welcomed to visit our factory!
3. What is your warranty for the CTPs ?
Three years' Laser Head and main spare parts for the CTP machine, One year for the CTP Processor.
4. What is the Lead Time?
Usually 10-30 days, and we will try our best to meet your demands.
5. Can you also supply the Workflow and RIP?
Yes, we can provide the Workflow Brain New and RIP Compose V12.
6. What about the Installation and after-sales technician support?
Our engineer can go to help the installation and provide the necessary training. The buyer should take the round air plane tickets and service charge and the local accommodation cost. Any problems or questions,we will be at your disposal 7x24 hours.