Wide Format CTCP Thermal CTP Plate Processor for CTP Plate Processing
for Online or Offline Offset Printing Thermal CTP/CTCP Platesetter
1) PLC automatic control system: the computer precision processing;
2) LED interface, easy to operate;
3) PVC board tub and tough rubber roller, resistant to acid alkali corrosion;
4) Proper and complete structure: developing, washing, gluing, drying tank;
5) Automatic standby function, to help electricity and water saving,
6) Automatic rehydration system;
7) Convenient operation management.
|Page size||The most wide: 1500 mm shortest: 300 mm|
|Processing power||Speed adjustable (10 to 60 seconds) 400-1000 mm/minutes|
|Temperature||10 to 45 ℃ can be adjusted (automatic temperature control, cooling system)|
|Drying temperature||20-65 ℃ can be adjusted|
|Power supply||220 V (208 V-240 V) single-phase 50-60hz/6.5KW|
|Rotary Speed of Wash Brush||85-130rpm|
|Water supply||Tap water|
|Gumming||Auto gumming system|
|Dev.heating-up rate||About 0.5 ℃/minute|
Other smaller models
|ECOOGRAPHIX CTP Processor Series Specifications|
|Page Size||280-895 mm||280-1150 mm||290-1250 mm|
|Processor Power||10-60 seconds||10-60 seconds||10-60 seconds|
|Temperature||10 to 45 ºC can be adjusted (automatic temperature control, cooling system)|
|Drying Temperature||20-65 ºC can be adjusted|
|Electricity Source||220 V (210V-240 V)single-phase50-60hz|
1. What are your main products ?
Our main products are the Prepress 4up and 8up Online/Offline Thermal CTP , CTCP , VLF CTP and CTCP, Flexo CTP , Processor , Offset Plates ,inks , blankets , postpress Packing equipments and so on.
Our partners in USA,Canada,Mexico,Colombia,Turkey,Hungary,South Africa and so on are very pleased with our Technician Support service and product performance.
You can get the prepress equipment and consumables all in one and no worry about the after-sales service from our company.
2. Where is your factory ?
Our CTP machine factory is located in Hangzhou city , which is about 1.5 hour by train from Shanghai.
You are warmly welcomed to visit our factory!
3. What is your warranty for the CTPs ?
Three years' Laser Head and main spare parts for the CTP machine, One year for the CTP Processor.
4. What is the Lead Time?
Usually 10-30 days, and we will try our best to meet your demands.
5. Can you also supply the Workflow and RIP?
Yes, we can provide the Workflow Brain New and RIP Compose V12.
6. What about the Installation and after-sales technician support?
Our engineer can go to help the installation and provide the necessary training. The buyer should take the round air plane tickets and service charge and the local accommodation cost. Any problems or questions,we will be at your disposal 7x24 hours.